U.S. Solid 3/4 inch Motorized Ball Valve 9-24V DC Brass Electric Valve Normally Closed 5-Wire Standard Port with Visual Position Indicator IP65
Ball Valves
Product details
About This
- STANDARD PORT NPT FLOW CONTROL: This 3/4 inch NPT brass motorized valve uses a standard-port, reduced-bore design for controlled, reliable flow in a compact body; suitable for home irrigation, RV plumbing, home brewing, and HVAC fluid lines
- Built-In Visual Position Indicator: A high-visibility window on top of the actuator shows open or closed status at a glance, eliminating the need for external sensors in automation panels, smart home systems, or industrial PLC setups.
- Auto Power Cut-Off via Limit Switch: Built-in limit switches cut power once the valve reaches full open or closed position, preventing overheating and reducing energy draw — opening or closing fully in 6 to 8 seconds at 5W max power.
- Rated IP65 and 80,000-Cycle Lifespan: Brass valve body with PTFE ball seat and EPDM seals handles media from 0 to 100 degrees C and up to 1.0 MPa pressure. IP65 enclosure resists dust ingress and water spray from all directions.
- Normally Closed Fail-Safe and 5-Wire Interface: Valve defaults to closed when unpowered for leak prevention and automated shut-off safety. The 5-wire control interface supports 9-24V DC systems including Arduino, PLC, and home automation controllers.
Overview
- Material : Brass
- Brand : U.S. Solid
- Exterior Finish : Brass
- Inlet Connection Size : 3/4 inches
- Inlet Connection Type : National Pipe Tapered
- Outlet Connection Type : NPT
- Maximum Operating Pressure : 1000 kilopascal
- Number of Ports : 2
- Outlet Connection Size : 3/4 inches
- Specification Met : IP65
Good to know
Before setup
Follow the directions for this item.
Measure your space
Check the measurements for your selected size or variant.
Item-specific care
Use the care instructions supplied with this item.
Compare what matters to you
Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.
| Consideration | Look for | Ask yourself |
|---|---|---|
| Hoses & nozzles | Reach, connect and spray. | How do I choose the right hose length? |
| Watering cans | Consider capacity, balance and the space around each plant. | Is a watering can or a hose better for my space? |
| Drip & irrigation | Plan a watering layout around beds, containers and connections. | What should I check before planning drip irrigation? |
Questions before you choose
How do I choose a hose length?
Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.
How do I check hose and fitting connections?
Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.
What should I compare before planning drip watering?
Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.
How should I care for and store watering items?
Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.
Can I request an order change or cancellation?
Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.
Where can I find tracking information or ask about my order?
Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.
Where can I check shipping information?
Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.
How do I check return or refund terms?
Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.