U.S. Solid 1" Motorized Ball Valve 85-265V AC Brass Electrical Ball Valve, 2 Wire Auto Return Setup Normally Closed
U.S. Solid 1" Motorized Ball Valve 85-265V AC Brass Electrical Ball Valve, 2 Wire Auto Return Setup Normally Closed
Ball Valves
Product details
About This
- DURABLE BRASS FULL PORT BODY: Premium forged brass valve uses a full-port 25 mm bore matching pipe diameter for maximum flow with minimal pressure drop; ideal for water, air, oil, and gas lines in residential or light commercial setups
- WIDE AC 85-265 V OPERATION: Drives fully open or closed in 6 to 8 seconds with 6 Nm of torque using a wide-range AC 85-265 V power supply; delivers a firm, reliable seal without requiring low-voltage transformers
- AUTOMATED SAFETY SHUT-OFF: Simple 2-wire auto-return setup opens the valve when energized and automatically returns to the fully closed position during power loss for leak prevention and emergency automated line isolation
- LOW-POWER SOLENOID ALTERNATIVE: Once fully open, an internal limit switch cuts the drive motor to draw only minimal maintenance current with little heat, unlike continuously energized solenoid coils that stay hot and burn out
- IP65 RATED DURABILITY: Enclosure seals against dust and water spray from all directions; PTFE and silicone seats handle up to 1.0 MPa (145 psi) for a rated 80,000 to 100,000 cycle service life in irrigation, HVAC, and plumbing
Overview
- Material : Stainless Steel
- Brand : U.S. Solid
- Item dimensions L x W x H : 4.13 x 3.23 x 2.91 inches
- Exterior Finish : Brass
- Inlet Connection Size : 1 inches
- Inlet Connection Type : National Pipe Tapered
- Outlet Connection Type : NPT
- Maximum Operating Pressure : 1000 kilopascal
- Number of Ports : 2
- Outlet Connection Size : 1 inches
Good to know
Before setup
Follow the directions for this item.
Measure your space
Check the measurements for your selected size or variant.
Item-specific care
Use the care instructions supplied with this item.
Compare what matters to you
Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.
| Consideration | Look for | Ask yourself |
|---|---|---|
| Hoses & nozzles | Reach, connect and spray. | How do I choose the right hose length? |
| Watering cans | Consider capacity, balance and the space around each plant. | Is a watering can or a hose better for my space? |
| Drip & irrigation | Plan a watering layout around beds, containers and connections. | What should I check before planning drip irrigation? |
Questions before you choose
How do I choose a hose length?
Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.
How do I check hose and fitting connections?
Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.
What should I compare before planning drip watering?
Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.
How should I care for and store watering items?
Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.
Can I request an order change or cancellation?
Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.
Where can I find tracking information or ask about my order?
Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.
Where can I check shipping information?
Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.
How do I check return or refund terms?
Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.