U.S. Solid 1-1/2 in Brass Electric Solenoid Valve, AC 110 V, Normally Closed, FKM Seal, 29 Cv, Semi-Direct, for Air Gas Fuel and Oil
U.S. Solid 1-1/2 in Brass Electric Solenoid Valve, AC 110 V, Normally Closed, FKM Seal, 29 Cv, Semi-Direct, for Air Gas Fuel and Oil
Solenoid Valves
Product details
About This
- FAST RESPONSE, OPENS FROM 0 BAR: A semi-direct design opens from 0 bar with no minimum pressure differential and switches open or closed in under 1 second when energized or de-energized, rated for over 1 million cycles
- INDUSTRIAL BRASS, FOR FUEL GAS AND OIL: A corrosion-resistant brass body suits gasoline, diesel, kerosene, natural gas, air, and oils; because brass contains lead, do not use it for drinking water
- FKM SEAL FOR HEAT AND FUEL: The FKM (fluoroelastomer) seal resists high temperatures and corrosive chemicals, fuels, oils, and lubricants over -10 to 120 °C (14 to 248 °F) where NBR or EPDM seals would swell
- NORMALLY CLOSED, NOT CONTINUOUS DUTY: An internal spring holds it closed with no power; energize the AC 110 V coil (27.5 VA) to open. Not a continuous-duty valve, so limit energizing to 8 hours per cycle to protect the coil
- FOR IRRIGATION, RO, AND MORE: Controls flow for fuel and gas handling, irrigation, reverse osmosis, home brewing, and DIY projects, passing 29 Cv through a 40 mm orifice, rated IP65
Overview
- Material : Brass
- Brand : U.S. Solid
- Item dimensions L x W x H : 7.9 x 6.9 x 5 inches
- Exterior Finish : Brass
- Inlet Connection Size : 1.5 inches
- Inlet Connection Type : Threaded
- Outlet Connection Type : FNPT
- Maximum Operating Pressure : 101 psi
- Number of Ports : 2
- Outlet Connection Size : 1.5 inches
Good to know
Before setup
Follow the directions for this item.
Measure your space
Check the measurements for your selected size or variant.
Item-specific care
Use the care instructions supplied with this item.
Compare what matters to you
Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.
| Consideration | Look for | Ask yourself |
|---|---|---|
| Hoses & nozzles | Reach, connect and spray. | How do I choose the right hose length? |
| Watering cans | Consider capacity, balance and the space around each plant. | Is a watering can or a hose better for my space? |
| Drip & irrigation | Plan a watering layout around beds, containers and connections. | What should I check before planning drip irrigation? |
Questions before you choose
How do I choose a hose length?
Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.
How do I check hose and fitting connections?
Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.
What should I compare before planning drip watering?
Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.
How should I care for and store watering items?
Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.
Can I request an order change or cancellation?
Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.
Where can I find tracking information or ask about my order?
Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.
Where can I check shipping information?
Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.
How do I check return or refund terms?
Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.