U.S. Solid 3/4" UPVC Motorized Ball Valve - Plastic Electrical Ball Valve, 2 Wire Auto Return, AC 110~230V, Normally Closed
Ball Valves
Product details
About This
- 3/4 INCH 110V MOTORIZED BALL VALVE: Corrosion-resistant, lightweight UPVC electric ball valve with 3/4 inch NPT threads and a standard-port, reduced-bore design for controlled, reliable flow, pressure-rated up to 145 psi
- PLUG-AND-PLAY US PLUG: Pre-wired with a standard North American power cord and US plug for direct wall-outlet installation with no manual wiring, saving setup time while eliminating complex electrical connection errors
- FAIL-SAFE AUTO RETURN + MANUAL OVERRIDE: Stays normally closed and opens when powered; an internal capacitor drives the valve fully shut within 8 seconds the instant power is cut, plus a manual override lever for hands-on control during a power outage
- WEATHERPROOF, WITH POSITION INDICATOR: The IP67 water-resistant actuator withstands rain and dust, and an on/off indicator shows open or closed status at a glance; the energy-saving motor replaces solenoid valves for extended, long-term open holds
- LIGHTWEIGHT UPVC, RUST-PROOF: Corrosion-proof UPVC resists rust and many chemicals for irrigation, pools, and water transfer; not intended for potable drinking water; handles media 5°C to 55°C and rated for 80,000 to 100,000 cycles
Overview
- Material : PPO
- Brand : U.S. Solid
- Item dimensions L x W x H : 4.07 x 2.85 x 2.61 inches
- Exterior Finish : Plastic
- Inlet Connection Size : 3/4 inches
- Inlet Connection Type : National Pipe Tapered
- Outlet Connection Type : NPT
- Maximum Operating Pressure : 145 psi
- Number of Ports : 2
- Outlet Connection Size : 0.75 inches
Good to know
Before setup
Follow the directions for this item.
Measure your space
Check the measurements for your selected size or variant.
Item-specific care
Use the care instructions supplied with this item.
Compare what matters to you
Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.
| Consideration | Look for | Ask yourself |
|---|---|---|
| Hoses & nozzles | Reach, connect and spray. | How do I choose the right hose length? |
| Watering cans | Consider capacity, balance and the space around each plant. | Is a watering can or a hose better for my space? |
| Drip & irrigation | Plan a watering layout around beds, containers and connections. | What should I check before planning drip irrigation? |
Questions before you choose
How do I choose a hose length?
Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.
How do I check hose and fitting connections?
Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.
What should I compare before planning drip watering?
Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.
How should I care for and store watering items?
Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.
Can I request an order change or cancellation?
Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.
Where can I find tracking information or ask about my order?
Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.
Where can I check shipping information?
Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.
How do I check return or refund terms?
Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.