U.S. Solid 1 in Brass Motorized Ball Valve, Manual Override, Normally Open, Standard Port, 9-24V AC/DC, 2-Wire Auto Return, NPT
U.S. Solid 1 in Brass Motorized Ball Valve, Manual Override, Normally Open, Standard Port, 9-24V AC/DC, 2-Wire Auto Return, NPT
Ball Valves
Product details
About This
- Normally Open Auto Return: With a 2-wire connection, this valve closes when powered and automatically returns to the fully open position when power is removed — ideal for fail-safe water, air, or gas shutoff systems.
- Wide Voltage Compatibility: Operates on any AC or DC supply from 9V to 24V, opening or closing in 6 to 8 seconds, with a maximum power draw of 5W and maximum torque of 2.5 N·m for reliable actuation.
- Brass Body with PTFE Seal: The valve body is machined brass with a PTFE seal and IP65-rated enclosure, rated for media temperatures from 32 degrees F to 194 degrees F and working pressure up to 145 psi.
- 1 in NPT Standard Port Sizing: Features a 1-inch National Pipe Thread connection with a 20mm orifice — fits standard 1 in NPT pipe systems used in irrigation, HVAC, plumbing, and industrial flow control applications.
- Long Service Life with Manual Override: Rated for 80,000 to 100,000 actuation cycles and includes a manual override function, allowing hand operation during power outages or commissioning without external tools.
Overview
- Material : Brass
- Brand : U.S. Solid
- Item dimensions L x W x H : 4.02 x 3.23 x 3.23 inches
- Exterior Finish : Brass
- Inlet Connection Size : 1 inches
- Maximum Operating Pressure : 10 bar
- Number of Ports : 2
- Unit Count : 1 Count
- Manufacturer : U.S. Solid
- Number of Items : 1
Good to know
Before setup
Follow the directions for this item.
Measure your space
Check the measurements for your selected size or variant.
Item-specific care
Use the care instructions supplied with this item.
Compare what matters to you
Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.
| Consideration | Look for | Ask yourself |
|---|---|---|
| Hoses & nozzles | Reach, connect and spray. | How do I choose the right hose length? |
| Watering cans | Consider capacity, balance and the space around each plant. | Is a watering can or a hose better for my space? |
| Drip & irrigation | Plan a watering layout around beds, containers and connections. | What should I check before planning drip irrigation? |
Questions before you choose
How do I choose a hose length?
Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.
How do I check hose and fitting connections?
Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.
What should I compare before planning drip watering?
Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.
How should I care for and store watering items?
Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.
Can I request an order change or cancellation?
Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.
Where can I find tracking information or ask about my order?
Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.
Where can I check shipping information?
Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.
How do I check return or refund terms?
Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.