U.S. Solid 1/2 in Brass Motorized Ball Valve, 9-24 V AC/DC, 2-Wire Auto Return, Normally Open, Full Port, Manual Override, Position Indicator
U.S. Solid 1/2 in Brass Motorized Ball Valve, 9-24 V AC/DC, 2-Wire Auto Return, Normally Open, Full Port, Manual Override, Position Indicator
Ball Valves
Product details
About This
- FULL PORT BRASS BODY: The forged brass body with 1/2 in NPT threads has a full-port 15 mm bore for full flow and minimal pressure drop on water, air, gas, and oil lines; the brass contains lead, not for drinking water
- WIDE 9-24 V AC/DC ACTUATION: Operates across the full 9 to 24 V AC/DC range and drives the ball fully closed or open in 6 to 7 seconds with 2.5 Nm of torque for smooth, automated on/off control
- 2-WIRE AUTO RETURN, NORMALLY OPEN: A 2-wire auto-return design drives the valve closed when energized and automatically returns it to the fully open position on power loss, so the line defaults open for cooling loops and fail-open safety
- LOW-POWER SOLENOID ALTERNATIVE: Once fully closed, an internal limit switch cuts the drive motor, so it draws only minimal maintenance current with little heat, unlike a solenoid coil that stays hot and power-hungry during long holds
- MANUAL OVERRIDE AND POSITION INDICATOR: A manual override turns the valve by hand during a power outage, and a visual position indicator shows open or closed; forged brass with PTFE and silicone seats rated for 80,000 to 100,000 cycles
Overview
- Material : Brass
- Brand : U.S. Solid
- Item dimensions L x W x H : 3.62 x 2.86 x 2.52 inches
- Exterior Finish : Brass
- Inlet Connection Size : 0.5 inches
- Maximum Operating Pressure : 10 bar
- Number of Ports : 2
- Unit Count : 1 Count
- Manufacturer : U.S. Solid
- Number of Items : 1
Good to know
Before setup
Follow the directions for this item.
Measure your space
Check the measurements for your selected size or variant.
Item-specific care
Use the care instructions supplied with this item.
Compare what matters to you
Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.
| Consideration | Look for | Ask yourself |
|---|---|---|
| Hoses & nozzles | Reach, connect and spray. | How do I choose the right hose length? |
| Watering cans | Consider capacity, balance and the space around each plant. | Is a watering can or a hose better for my space? |
| Drip & irrigation | Plan a watering layout around beds, containers and connections. | What should I check before planning drip irrigation? |
Questions before you choose
How do I choose a hose length?
Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.
How do I check hose and fitting connections?
Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.
What should I compare before planning drip watering?
Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.
How should I care for and store watering items?
Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.
Can I request an order change or cancellation?
Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.
Where can I find tracking information or ask about my order?
Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.
Where can I check shipping information?
Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.
How do I check return or refund terms?
Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.