U.S. Solid Motorized Ball Valve - IP67 1/2inch Stainless Steel Ball Valve 9-24V with Waterproof Cover, Full Port, Manual Function, 2 Wire Auto Return, NPT, Normally Open
Ball Valves
Product details
About This
- STAINLESS STEEL, FULL PORT: The corrosion-resistant stainless steel body with an FKM seat and full-port 15 mm bore gives full flow for water and air in HVAC, irrigation, water treatment, and industrial lines
- 2-WIRE AUTO RETURN, NORMALLY OPEN: Energize to close the valve; on power loss it automatically returns to the fully open position, keeping the line open by default for cooling loops and systems that must not block flow
- LOW-POWER SOLENOID ALTERNATIVE: Once fully closed, an internal limit switch cuts the motor, drawing minimal current with little heat, a cool-running swap for solenoids on long holds in solar and off-grid setups
- SAFE LOW-VOLTAGE 9-24 V AC/DC: Runs on solar, battery, or RV and marine 12-24 V systems and integrates with PLC, Arduino, and home automation; rated to 1.0 MPa (145 psi) for wet-area and off-grid control
- MANUAL OVERRIDE, POSITION INDICATOR, WATERPROOF COVER: A manual override and visual position indicator let you turn and check the valve by hand; the IP67 actuator with a waterproof cover handles outdoor and washdown installs for 70,000 cycles
Overview
- Material : Stainless Steel
- Brand : U.S. Solid
- Exterior Finish : Stainless Steel
- Inlet Connection Size : 0.5 inches
- Inlet Connection Type : National Pipe Tapered
- Outlet Connection Type : NPT
- Maximum Operating Pressure : 145 psi
- Outlet Connection Size : 0.5 inches
- Number of Packs : 1
- Global Trade Identification Number : 00888107124856
Good to know
Before setup
Follow the directions for this item.
Measure your space
Check the measurements for your selected size or variant.
Item-specific care
Use the care instructions supplied with this item.
Compare what matters to you
Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.
| Consideration | Look for | Ask yourself |
|---|---|---|
| Hoses & nozzles | Reach, connect and spray. | How do I choose the right hose length? |
| Watering cans | Consider capacity, balance and the space around each plant. | Is a watering can or a hose better for my space? |
| Drip & irrigation | Plan a watering layout around beds, containers and connections. | What should I check before planning drip irrigation? |
Questions before you choose
How do I choose a hose length?
Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.
How do I check hose and fitting connections?
Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.
What should I compare before planning drip watering?
Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.
How should I care for and store watering items?
Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.
Can I request an order change or cancellation?
Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.
Where can I find tracking information or ask about my order?
Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.
Where can I check shipping information?
Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.
How do I check return or refund terms?
Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.