Commercial Pre Rinse Sprayer Head: 7/8"-20UNEF Handle Grip Assembly Pre Rinse Sprayer with - 1.3/3.85 GPM High Pressure Spray Head - Sink Faucet Replacement Part - Gray and Brushed Nickel by IVIGA

Commercial Pre Rinse Sprayer Head: 7/8"-20UNEF Handle Grip Assembly Pre Rinse Sprayer with - 1.3/3.85 GPM High Pressure Spray Head - Sink Faucet Replacement Part - Gray and Brushed Nickel

$91.98
Skip to product information
Commercial Pre Rinse Sprayer Head: 7/8"-20UNEF Handle Grip Assembly Pre Rinse Sprayer with - 1.3/3.85 GPM High Pressure Spray Head - Sink Faucet Replacement Part - Gray and Brushed Nickel by IVIGA

Commercial Pre Rinse Sprayer Head: 7/8"-20UNEF Handle Grip Assembly Pre Rinse Sprayer with - 1.3/3.85 GPM High Pressure Spray Head - Sink Faucet Replacement Part - Gray and Brushed Nickel

$91.98
Product details

About This

  • 【Wise design】Gray and Brushed Nickel Rubber nozzles are installed at the sprayer to prevent hard water and scale accumulation, easy to operate and maintain. At the same time, it is equipped with a stainless steel ring, which can be used for firm fixation. In addition, it also adopts an ergonomic handle, which makes it comfortable even if it is used for a long time.
  • 【Efficient and dedicated】The handle connector size is 7/8"-20UNEF, Designed for all kinds of pre-flush commercial faucets on the market. You only need to press the handle to provide high-pressure spray, flow rate can reach 1.42 GPM. If you want to spray continuously for a long time, just keep pressing, or you can use the O ring to keep the water flowing, free your hands.(Before buying, please make sure that the size of the connector matches your faucet.)
  • 【Easy to Replace & Use】It takes less than 5 minutes to remove the old sprayer and install the new one. You only need to place the connected rubber ring between the handle and the hose, and tighten them manually, without using any tape. (Tips: Make sure the gasket is inside). Just press the plastic handle of the sprayer to divert the water flow from the main water outlet.
  • 【Wide range of applications】it can be used in restaurants, hotels, family kitchens or other heavy industrial kitchens. to decorate the kitchen is also a good choice.
  • 【Quality Assurance Service】If you have any questions about this Pre-Rinse Spray Valve, we will deal with your questions as soon as possible and give you a satisfactory answer.

Overview

  • Material : Brass,lastic,Stainless Steel
  • Brand : IVIGA
  • Exterior Finish : Stainless Steel, Brushed Nickel
  • Inlet Connection Size : 0.88 inches
  • Outlet Connection Type : NPT 7/8"-20UNEF
  • Number of Ports : 2
  • Outlet Connection Size : 0.88 inches
  • Number of Packs : 1
  • Unit Count : 1 Count
  • Manufacturer : KaiPingShiJiaDunWeiYuYouXianGongSi

Good to know

Before setup

Follow the directions for this item.

Measure your space

Check the measurements for your selected size or variant.

Item-specific care

Use the care instructions supplied with this item.

Compare what matters to you

Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.

Compare what matters to you
Consideration Look for Ask yourself
Hoses & nozzles Reach, connect and spray. How do I choose the right hose length?
Watering cans Consider capacity, balance and the space around each plant. Is a watering can or a hose better for my space?
Drip & irrigation Plan a watering layout around beds, containers and connections. What should I check before planning drip irrigation?

Questions before you choose

How do I choose a hose length?

Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.

How do I check hose and fitting connections?

Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.

What should I compare before planning drip watering?

Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.

How should I care for and store watering items?

Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.

Can I request an order change or cancellation?

Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.

Where can I find tracking information or ask about my order?

Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.

Where can I check shipping information?

Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.

How do I check return or refund terms?

Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.

You may also like

View all