U.S. Solid 1/2 in Motorized Ball Valve with Programmable Auto On-Off Cycle Timer, 2-Way Brass Electric Actuator, 00:00:00-99:59:59 Timing, IP67, AC/DC 9-24 V, NPT, for Water and Air
Ball Valves
Product details
About This
- PROGRAMMABLE OPEN, CLOSE, AND REPEAT CYCLE: A built-in digital timer sets exact open and close durations from 00:00:00 to 99:59:59, then repeats the cycle on its own to automate any plumbed water or air line
- SOLID BRASS BODY FOR WATER, AIR, AND OIL: The durable brass body suits water, air, and oil lines in HVAC, irrigation, and industrial automation; the brass contains lead and is not suitable for drinking water
- MOTORIZED, NOT SOLENOID, LOW HEAT: A motor drives the ball; an internal limit switch cuts the motor once it reaches open or closed, so it draws minimal holding current and stays cool; the valve keeps its last position if power is lost
- 1.0 MPA, WIDE TEMPERATURE, LONG-LIFE ACTUATOR: Handles up to 1.0 MPa (145 psi), fluid 2°C to 90°C (36°F to 194°F); FKM and PTFE seals with a 90 degree, 3 Nm quarter-turn actuator for over 70,000 open and close cycles
- IP67 SEALED, 9-24 V AC/DC POWER: The IP67 housing keeps out dust and moisture for damp and washdown areas; wide 9 to 24 V AC/DC suits solar, battery, PLC, and smart home setups for irrigation, recycling, dosing, and process lines
Overview
- Material : Brass
- Brand : U.S. Solid
- Item dimensions L x W x H : 2.55 x 2.55 x 3.54 inches
- Exterior Finish : Brass
- Inlet Connection Size : 0.5 inches
- Inlet Connection Type : National Pipe Tapered
- Outlet Connection Type : NPT
- Maximum Operating Pressure : 145 psi
- Number of Ports : 2
- Outlet Connection Size : 0.5 inches
Good to know
Before setup
Follow the directions for this item.
Measure your space
Check the measurements for your selected size or variant.
Item-specific care
Use the care instructions supplied with this item.
Compare what matters to you
Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.
| Consideration | Look for | Ask yourself |
|---|---|---|
| Hoses & nozzles | Reach, connect and spray. | How do I choose the right hose length? |
| Watering cans | Consider capacity, balance and the space around each plant. | Is a watering can or a hose better for my space? |
| Drip & irrigation | Plan a watering layout around beds, containers and connections. | What should I check before planning drip irrigation? |
Questions before you choose
How do I choose a hose length?
Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.
How do I check hose and fitting connections?
Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.
What should I compare before planning drip watering?
Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.
How should I care for and store watering items?
Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.
Can I request an order change or cancellation?
Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.
Where can I find tracking information or ask about my order?
Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.
Where can I check shipping information?
Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.
How do I check return or refund terms?
Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.