Mist Coolant Lubrication Spray System YS-BPV-300 for Milling & Engraving Machine, 1/4" and 8mm Air Inlet Hose Connector, Cutting Cooling Mister, Pack of 2
Mist Coolant Lubrication Spray System YS-BPV-300 for Milling & Engraving Machine, 1/4" and 8mm Air Inlet Hose Connector, Cutting Cooling Mister, Pack of 2
Cutting Tool Coolants
Product details
About This
- Package Include: 2 x Mist Coolant Spray System, 4mm x 2.5mm hose (1.5m/5ft), Air inlet 8mm or 1/4-inch, Oil inlet pipe 4mm (5/32-inch)
- Additional 1/4 inch inlet connector included. The kit includes an additional quick connect fitting compatible with 1/4-inch OD air tubing, allowing you to replace it as needed (use raw rubber tape during installation of the 1/4-inch fitting to ensure airtightness)
- High Efficiency: Using the sprayer enables simultaneous cooling, lubrication, and chip removal during machining, increasing cutting speed, saving time, and reducing tool wear
- Coolant Savings: The atomized cooling spray lubrication system conserves coolant by precisely controlling sprayer and coolant flow rates, while also reducing consumption of pneumatic tool oil and anchor lubricants
- Application Range: The atomized cooling lubrication spray system is suitable for lubricating metal lathes, milling machines, grinders, tapping machines, milling machining centers, sawing machines, woodworking equipment, feeders, and other machinery
Good to know
Before setup
Follow the directions for this item.
Measure your space
Check the measurements for your selected size or variant.
Item-specific care
Use the care instructions supplied with this item.
Compare what matters to you
Use these prompts to compare options. This is guidance, not a product test or a comparison with another seller.
| Consideration | Look for | Ask yourself |
|---|---|---|
| Hoses & nozzles | Reach, connect and spray. | How do I choose the right hose length? |
| Watering cans | Consider capacity, balance and the space around each plant. | Is a watering can or a hose better for my space? |
| Drip & irrigation | Plan a watering layout around beds, containers and connections. | What should I check before planning drip irrigation? |
Questions before you choose
How do I choose a hose length?
Measure the route from the water connection to the area you plan to water, including corners. Compare it with the listed hose length.
How do I check hose and fitting connections?
Compare the listed connector size and specification with your own connection and other parts. Similar names or photographs do not establish fit.
What should I compare before planning drip watering?
Map the plants and spacing, then read the tubing, connection and timer requirements for each item. Do not assume all components fit together.
How should I care for and store watering items?
Follow each item's care instructions and compare its dimensions with your storage space. This guidance does not add tools or accessories to a listing's contents.
Can I request an order change or cancellation?
Use the Contact page and include your order reference and requested change. A request does not guarantee that the order can be changed or cancelled.
Where can I find tracking information or ask about my order?
Review your confirmation and any order updates for available tracking information. Use the Contact page with your order reference for clarification. Tracking is not assumed for every order.
Where can I check shipping information?
Read the Shipping policy and the shipping information shown for your order. Use the Contact page for questions about a listed shipping detail.
How do I check return or refund terms?
Read the Refund policy for applicable conditions and instructions. Use the Contact page for a question before arranging a return. This FAQ does not guarantee eligibility.